Tag: miniature bearings

 
  • PIB – An Established Distributor of NMB Bearings

    PIB – An Established Distributor of NMB Bearings

    NMB Technologies Corporation, a Minebea Group company, is the world’s largest manufacturer of miniature precision ball bearings. NMB manufactures bearings ranging in size from .1181 […]

     
     
  • GRW Miniature Bearings

    GRW Miniature Bearings

      German-made GRW miniature bearings are synonymous with precision, dependability and smooth performance. These features are exemplified with its use in the microelectronics and instrument […]

     
     
  • Miniature Bearings

    Miniature Bearings

    Miniature_full_width Miniature bearings carry moderate radial and thrust loads at low operating torque and provide high performance within small envelope designs. Pacific International Bearing offers […]

     
     
  • GRW Lubricants for Miniature Bearings

    Code Brand Name Manufacturer Basic Oil Viscosity40°C/100°C (mm2/s) OperatingTemperatureRange Specification LOOl Aero Shell Fluid 12 Shell Ester 15/3,7 —40 bis 100°C MIL-L-6085 C L010 Isoflex […]

     
     
  • Criteria For Lubricating Oil Selection

    NAME General grease Diester grease Silicone grease Cup grease Fibre grease Mobile grease Mixed base grease Complex Base grease Non-Soap Base grease THICKENING AGENT Li […]

     
     
  • Common Oil Brand Efficiency

    MANUFACTURER BRAND EZO CODE LUBRICANT BASE FLASH POINT °C VISCOSITY (cSt) OPERATING TEMP MIL Standard Shell Oil Co. Aero Shell Fluid 12 AF2 Diester 235 […]

     
     
  • Mounting of Bearings

    Mounting of Bearings

    Hanged Ball Bearings There are many advantages in using miniature and instrument ball bearings which have a flange on the outer ring. Stepped housing bores, […]

     
     
  • Fatigue Life Calculation Formula

    Fatigue Life Calculation Formula

    The fatigue life (basic rating life) is the number of revolutions (or number of hours at constant speed) which 90% of a sufficiently large quantity of apparently identical […]

     
     
  • Noise Testing

    The abbreviation GPR stands for 100% noise-tested ball bearings. We test the amplitude of the vibrations generated by the ball bearings at the set speeds and […]

     
     
  • Fits Procedure

    Fits Procedure

    The tolerances of the inner ring bore diameter and of the outside diameter of the inner ring are defined in accordance with international standards. The […]